Configuring Lan Settings; Configuring Basic Lan Settings; Ipv4 - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Network
Configuring LAN Settings
Configuring LAN Settings
!
CAUTION
STEP 1
STEP 2
STEP 3
STEP 4
Cisco CVR100W Wireless-N 300M Router Administration Guide
The default DHCP and TCP/IP settings work for most applications. You can assign
an IP address to each additional logical subnet on the CVR100W.
If the CVR100W is connected to a modem or device that has a configured network
on the same subnet (192. 1 68. 1 .x), the CVR100W automatically changes the LAN
subnet to a random subnet based on 10.x.x.x so there is no conflict with the subnet
on the WAN side of the CVR100W.
Configuring Basic LAN Settings
IPv4
To configure the default LAN IP address of the CVR100W:
Choose Networking > LAN > LAN Configuration.
In the IPv4 area, enter the following information:
VLAN
Local IP Address
Subnet mask
Click Save.
After changing the CVR100W's LAN IP address, your PC is no longer connected to
the CVR100W.
To reconnect your PC to the CVR100W, do one of the following:
•
If DHCP is configured on the CVR100W, release and renew your PC's IP
address.
Choose the VLAN number from the drop-down menu.
Enter the LAN IP address of the CVR100W.
Make sure the address is not in use by another device.
Choose the subnet mask for the new IP address from
the drop-down menu. The default subnet is
255.255.255.0.
2
28
Advertisement
Table of Contents
