Time - Cisco MDS 9124 - Fabric Switch Reference
Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)
Hide thumbs
Also See for Cisco MDS 9124 - Fabric Switch:
- Datasheet (9 pages) ,
- Specifications (3 pages) ,
- Command reference manual (1640 pages)
Table of Contents
Advertisement
Chapter 23
T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
time
To configure the time for the command schedule, use the time command. To disable this feature, use the
no form of the command.
Syntax Description
daily daily-schedule
monthly monthly-schedule
start
start-time
now
weekly weekly-schedule
Defaults
Disabled.
Command Modes
Scheduler job configuration submode.
Command History
Release
2.0(x)
Usage Guidelines
To use this command, the command scheduler must be enabled using the scheduler enable command.
Examples
The following example shows how to configure a command schedule job to run every Friday at 2200.
switch# config terminal
switch(config)# scheduler schedule name MySchedule
switch(config-schedule)# time weekly 6:22:00
The following example starts a command schedule job in two minutes and repeats every 24 hours.
switch(config-schedule)# time start now repeat 24:00
OL-16217-01, Cisco MDS SAN-OS Release 3.x
time {daily daily-schedule | monthly monthly-schedule | start {start-time | now} |
weekly weekly-schedule}
no time
Modification
This command was introduced.
Configures a daily command schedule. The format is HH:MM, where
HH is hours (0 to 23) and MM is minutes (0 to 59). Maximum length is
5 characters.
Configures a monthly command schedule. The format is dm:HH:MM,
where dow is the day of the month (1 to 31), HH is hours (0 to 23) and
MM is minutes (0 to 59). Maximum length is 8 characters.
Schedules a job to run at a future time.
Specifies the future time to run the job. The format is
yyyy:mmm:dd:HH:MM, where yyyy is the year, mmm is the month (jan
to dec), dd is the day of the month (1 to 31), HH is hours (0 to 23) and
MM is minutes (0 to 59). Maximum length is 18 characters.
Starts the job two minutes after the command is entered.
Configures a weekly command schedule. The format is dow:HH:MM,
where dow is the day of the week (1 to 7, Sun to Sat), HH is hours (0 to
23) and MM is minutes (0 to 59). Maximum length is 10 characters.
Cisco MDS 9000 Family Command Reference
time
23-47
Advertisement
Table of Contents
