Show Zoneset - Cisco MDS 9124 - Fabric Switch Reference

Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)

Hide thumbs Also See for Cisco MDS 9124 - Fabric Switch:

Table of Contents

Show Commands

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show zoneset

To display the configured zone sets, use the show zoneset command.

Syntax Description

zoneset-name

Command Modes

Command History

Usage Guidelines

The following example displays configured zone set information.

switch# show zoneset vsan 1

zoneset name ZoneSet2 vsan 1

OL-16217-01, Cisco MDS SAN-OS Release 3.x

show zoneset [[active [vsan vsan-id]] |

[brief [active [vsan vsan-id] | vsan vsan-id]] |

[name zoneset-name

[active vsan vsan-id] |

[brief [active vsan vsan-id | vsan vsan-id]] |

[pending [active vsan vsan-id | brief [active vsan vsan-id | vsan vsan-id] | vsan vsan-id]] |

[vsan vsan-id]] |

[active vsan vsan-id] |

[brief [active vsan vsan-id | vsan vsan-id]] |

[vsan vsan-id]] |

[vsan vsan-id]]

Displays only active zone sets.

Displays the VSAN.

Specifies the ID of the VSAN. The range is 1 to 4093

Displays zone set members in a brief list.

Displays members of a specified zone set.

Specifies the zone set name. The maximum is 64.

Displays zone sets members that are in session.

Modification

This command was modified.

Cisco MDS 9000 Family Command Reference

show zoneset