Wwn Vsan - Cisco MDS 9124 - Fabric Switch Reference
Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)
Hide thumbs
Also See for Cisco MDS 9124 - Fabric Switch:
- Datasheet (9 pages) ,
- Specifications (3 pages) ,
- Command reference manual (1640 pages)
Table of Contents
Advertisement
wwn vsan
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
wwn vsan
To configure a WWN for a suspended VSAN that has interop mode 4 enabled, use the wwn vsan
command in configuration mode. To discard the configuration, use the no form of the command.
Syntax Description
vsan-id
vsan-wwn wwn
Defaults
None.
Command Modes
Configuration submode.
Command History
Release
3.0(1)
Usage Guidelines
This command can succeed only if the following conditions are satisfied:
•
•
•
•
Examples
The following example shows how to assign a WWN to a VSAN.
switch# config t
switch(config)# wwn vsan 100 vsan-wwn 20:64:08:00:88:0d:5f:81
WWN can be configured for vsan in suspended state only
switch(config)# vsan database
switch(config-vsan-db)# vsan 100 suspend
switch(config-vsan-db)# exit
switch(config)# wwn vsan 100 vsan-wwn 20:64:08:00:88:0d:5f:81
switch(config)#
Related Commands
Command
vsan database
Cisco MDS 9000 Family Command Reference
26-8
wwn vsan vsan-id vsan-wwn wwn
no wwn vsan vsan-id vsan-wwn wwn
Specifies the VSAN ID. The range is 1 to 4093.
Specifies the WWN for the VSAN. The format is hh:hh:hh:hh:hh:hh:hh:hh.
Modification
This command was introduced.
The VSAN must be suspended.
The VSAN must have interop mode 4 enabled before you can specify the switch WWN for it.
The switch WWN must be unique throughout the entire fabric.
The configured switch WWN must have McData OUI [08:00:88].
Description
Creates multiple fabrics sharing the same physical infrastructure, assigns
ports to a VSAN, turns on or off interop mode, and load balances either per
originator exchange or source-destination ID.
Chapter 26
W Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Advertisement
Table of Contents
