System Default Zone Mode Enhanced - Cisco MDS 9124 - Fabric Switch Reference

Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)

Hide thumbs Also See for Cisco MDS 9124 - Fabric Switch:

Table of Contents

system default zone mode enhanced

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

system default zone mode enhanced

To configure the zone mode default value as enhanced, use the system default zone mode enhanced

command in the configuration mode. To configure the zone mode default value as basic, use the no form

of the command.

Syntax Description

This command has no other arguments or keywords.

Command Modes

Configuration mode.

Command History

Usage Guidelines

This command is used to configure the default value of zoning mode as basic or enhanced. The default

value of zoning mode is used when a VSAN is newly created. If the VSAN is deleted and recreated, the

value of the zoning mode will default to the value specified by the configuration.

The default zone mode can be configured using the setup script. Select the basic or enhanced default

zone mode configuration when the switch is reloaded after you enter the write erase command.

The following example shows how to configure the zone mode default value as enhanced.

switch# config

switch# system default zone mode enhanced

The following example shows how to configure the zone mode default value as basic.

switch# config

switch# no system default zone mode enhanced

Related Commands

show system default

Cisco MDS 9000 Family Command Reference

system default zone mode enhanced

no system default zone mode enhanced

Modification

This command was introduced.

Displays the default value of zone mode as basic and enhanced.

OL-16217-01, Cisco MDS SAN-OS Release 3.x