Iscsi Enable - Cisco MDS 9124 - Fabric Switch Reference

Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)

Hide thumbs Also See for Cisco MDS 9124 - Fabric Switch:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

iscsi enable

To enable the iSCSI feature in any Cisco MDS switch, issue the iscsi enable command. To disable this

feature, use the no form of the command.

Syntax Description

This command has no arguments or keywords.

Command Modes

Configuration mode.

Command History

Usage Guidelines

The configuration and verification commands for the iSCSI feature are only available when iSCSI is

enabled on a switch. When you disable this feature, all related configurations are automatically

This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class

BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.

The following command enables the iSCSI feature.

switch(config)# iscsi enable

switch(config)# iscsi enable module 8

switch(config)# int iscsi 2/1

switch(config-if)#

switch(config)# no shutdown

The following command disables the iSCSI feature (default).

switch(config)# no iscsi enable

OL-16217-01, Cisco MDS SAN-OS Release 3.x

iscsi enable

no iscsi enable

Modification

This command was introduced.

Updated the example command.

Cisco MDS 9000 Family Command Reference

iscsi enable