Table of Contents
Advertisement
Chapter 6
Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
As shown in
boot image. If you have configured layer 3 Intelligent Storage Services on your SSM, we recommend
that you shutdown these services before upgrading the SSI boot image. You can use dual fabric
configuration to minimize the impact of shutting down layer 3 services. See
Modules"
Sample install all Commands
Example 6-2
connected to the active supervisor. Once a switchover happens, you can see the rest of the output from
the console terminal of the standby supervisor module.
of the install all command on the console of the standby supervisor module.
result of the install all command issued from a console terminal for a system that contains an SSI image.
Similarly, you can view the results of the install all command issued from the SSH or Telnet terminal
that is connected to the active supervisor. Once a switchover happens, you need to log back into the
switch and issue the show install all status command (see the
page
Example 6-2
Hacienda# install all system bootflash:isan-2.1.2 kickstart bootflash:boot-2.1.2
Verifying image bootflash:/boot-2.1.2
[####################] 100% -- SUCCESS
Verifying image bootflash:/isan-2.1.2
[####################] 100% -- SUCCESS
Extracting "slc" version from image bootflash:/isan-2.1.2.
[####################] 100% -- SUCCESS
Extracting "ips" version from image bootflash:/isan-2.1.2.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/isan-2.1.2.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/boot-2.1.2.
[####################] 100% -- SUCCESS
Extracting "loader" version from image bootflash:/boot-2.1.2.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module
------
Images will be upgraded according to following table:
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Table
6-2, layer 3 Intelligent Storage Services traffic is disrupted when you update the SSI
for more information on updating the boot images on the SSM.
displays the result of the install all command issued from a console terminal that is
6-18).
Successful install all Command Issued from the Active Console
bootable
Impact
--------
--------------
1
yes
non-disruptive
2
yes
disruptive
3
yes
disruptive
4
yes
non-disruptive
5
yes
non-disruptive
6
yes
non-disruptive
Example 6-3
"Upgrade Status Verification" section on
Install-type
Reason
------------
------
rolling
rolling
Hitless upgrade is not supported
rolling
Hitless upgrade is not supported
rolling
reset
reset
Cisco MDS 9000 Family Configuration Guide
Automated Upgrades
Chapter 10, "Managing
displays the file output continuation
Example 6-4
displays the
6-11
Advertisement
Table of Contents
