Table of Contents
Advertisement
Chapter 34
Configuring the SAN Extension Tuner
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Example 34-4 Displays N ports Configured on a Specified Gigabit Ethernet Interface.
switch# show san-ext-tuner interface gigabitethernet 3/1
----------------------------------------------------------------------------
Interface
----------------------------------------------------------------------------
GigabitEthernet3/1
Example 34-5 Displays the Transfer Ready Size Configured for a Specified N Port
switch# show san-ext-tuner interface gigabitethernet 3/1 nport pWWN 10:0:0:0:0:0:0:1 vsan
91
Node name
Port name
Transfer ready size
Example 34-6 Displays All Virtual N Ports Configured in This Switch
switch# show san-ext-tuner nports
----------------------------------------------------------------------------
Interface
----------------------------------------------------------------------------
GigabitEthernet3/1
Default Settings
Table 34-1
Table 34-1
Parameters
Tuning
Transfer ready size
Outstanding I/Os
Number of transactions
Data generation format
OL-6973-03, Cisco MDS SAN-OS Release 2.x
NODE NAME
10:00:00:00:00:00:00:00
: 10:00:00:00:00:00:00:00
: 10:00:00:00:00:00:00:01
: all
NODE NAME
10:00:00:00:00:00:00:00
lists the default settings for tuning parameters.
Default Tuning Parameters
PORT NAME
10:00:00:00:00:00:00:01
PORT NAME
10:00:00:00:00:00:00:01
Default
Disabled.
Same as the transfer size in the SCSI write command.
1.
1.
All-zero format.
Cisco MDS 9000 Family Configuration Guide
Default Settings
VSAN
91
VSAN
91
34-9
Advertisement
Table of Contents
