Table of Contents
Advertisement
Chapter 11
Configuring Interfaces
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
sup-fc0 is up
mgmt0 is up
vsan1 is up, line protocol is up
. . .
port-channel 1 is trunking
. . .
You can also specify arguments (a range of interfaces or multiple, specified interfaces) to display
interface information. You can specify a range of interfaces by issuing a command with the following
example format:
interface fc1/1 - 5 , fc2/5 - 7
Note
The spaces are required before and after the dash ( - ) and before and after the comma ( , ).
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Hardware is Fibre Channel
Speed is 1 Gbps
139597 packets input, 13852970 bytes
0 multicast frames, 0 compressed
0 input errors, 0 frame, 0 overrun 0 fifo
139516 packets output, 16759004 bytes, 0 underruns
0 output errors, 0 collisions, 0 fifo
0 carrier errors
Hardware is FastEthernet
Address is 0005.3000.80fe
Internet address is 172.19.48.96/25
MTU 1500 bytes, BW 100 Mbps
321561 packets input, 70215667 bytes
0 multicast frames, 0 compressed
0 input errors, 0 frame, 0 overrun 0 fifo
334550 packets output, 307482596 bytes, 0 underruns
0 output errors, 0 collisions, 0 fifo
0 carrier errors
WWPN is 10:00:00:05:30:00:12:63, FCID is 0xef001e
Internet address is 10.10.11.10/24
MTU 1500 bytes, BW 1000000 Kbit
0 packets input, 0 bytes, 0 errors, 0 multicast
0 packets output, 0 bytes, 0 errors, 0 dropped
Hardware is Fibre Channel
Port WWN is 24:01:00:05:30:00:97:9e
Admin port mode is E, trunk mode is on
Port mode is TE
Port vsan is 1
Speed is 4 Gbps
Trunk vsans (admin allowed and active) (1,100,3000)
Trunk vsans (up)
Trunk vsans (isolated)
Trunk vsans (initializing)
5 minutes input rate 648 bits/sec, 81 bytes/sec, 0 frames/sec
5 minutes output rate 304 bits/sec, 38 bytes/sec, 0 frames/sec
4629945 frames input, 206672020 bytes
0 discards, 0 errors
0 CRC,
0 unknown class
0 too long, 0 too short
4547515 frames output, 687414748 bytes
0 discards, 0 errors
2 input OLS, 2 LRR, 4 NOS, 0 loop inits
6 output OLS, 2 LRR, 4 NOS, 0 loop inits
Member[1] : fc1/1
Member[2] : fc1/2.
Displaying Interface Information
(1)
(100,3000)
()
Cisco MDS 9000 Family Configuration Guide
11-25
Advertisement
Table of Contents
