hit counter script

Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 827

Mds 9000 family
Table of Contents

Advertisement

Chapter 35
Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
symbolic-node-name
port-type
port-ip-addr
fabric-port-wwn
hard-addr
Verify that zoning has resolved the FCID for the iSCSI client.
Step 20
switch# show zoneset active vsan 1
zoneset name iscsi-zoneset-v1 vsan 1
zone name iscsi-zone-1 vsan 1
* fcid 0x680001 [pwwn 21:00:00:20:37:6f:fd:97]
* fcid 0x680102 [pwwn 20:02:00:0b:fd:44:68:c2]
Step 21
Verify that the second initiator is connected to the two Fibre Channel targets in VSAN 2.
switch# show iscsi session initiator 10.15.1.11
Initiator 10.15.1.11
Initiator name iqn.1987-05.com.cisco:01.25589167f74c
Session #1
Session #2
switch# show iscsi initiator
iSCSI Node name is 10.15.1.11 <--- Initiator ID is the IP address
switch# show fcns database vsan 2
VSAN 2:
--------------------------------------------------------------------------
FCID
--------------------------------------------------------------------------
0x750001
0x750101
0x750200
Total number of entries = 3
OL-6973-03, Cisco MDS SAN-OS Release 2.x
:iqn.1987-05.com.cisco:01.e41695d16b1a
:N
:0.0.0.0
:21:81:00:0b:fd:44:68:c0
:0x000000
Target iqn.1987-05.com.cisco:05.172.22.92.166.07-05.21000020376ffe54
VSAN 2, ISID 00023d000001, Status active, no reservation
Target iqn.1987-05.com.cisco:05.172.22.92.166.07-05.2100002037a6a65d
VSAN 2, ISID 00023d000001, Status active, no reservation
iSCSI Initiator name: iqn.1987-05.com.cisco:01.25589167f74c
iSCSI alias name: oasis11.cisco.com
Node WWN is 20:04:00:0b:fd:44:68:c2 (dynamic)
Member of vsans: 2 <---
Number of Virtual n_ports: 1
Virtual Port WWN is 20:06:00:0b:fd:44:68:c2 (configured)
Interface iSCSI 7/5, Portal group tag: 0x304
VSAN ID 2, FCID 0x750200
TYPE
PWWN
NL
21:00:00:20:37:6f:fe:54 (Seagate) scsi-fcp:target
NL
21:00:00:20:37:a6:a6:5d (Seagate) scsi-fcp:target
N
20:06:00:0b:fd:44:68:c2 (Cisco)
iSCSI Authentication Setup Guidelines and Scenarios
<------------------------
vsan membership
(VENDOR)
Cisco MDS 9000 Family Configuration Guide
<--
<--
<---------
FC4-TYPE:FEATURE
<--
scsi-fcp:init isc..w
Session to
first target
Session to
second
target
Dynamic
WWN as
static WWN
not
assigned
Static
pWWN for
the initiator
iSCSI
initiator
entry in
name server
35-57

Advertisement

Table of Contents
loading

Table of Contents