Fiber Specifications; Optical Device Maintenance; How To Cable The 10Gbe Line Interface Ports - Cisco SCE8000 Installation And Configuration Manual
Cisco systems router installation and configuration guide
Hide thumbs
Also See for SCE8000:
- Configuration manual (262 pages) ,
- Installation and configuration manual (248 pages) ,
- Installation manual (51 pages)
Table of Contents
Advertisement
Cabling the 10GBE Line Interface Ports
Fiber Specifications
The following table presents the fiber specifications. The Cisco SCE8000 may be ordered with either
multi-mode or single mode transceivers. The transceiver type is indicated on the front panel under the
ports. Note that all transceivers on any individual Cisco SCE8000 are the same mode, either 850nm
multi-mode OR 1310nm single mode.
Table 6-1
SCE Model
Cisco SCE8000
10GBE MM
Cisco SCE8000
10GBE SM
Optical Device Maintenance
Any contamination of the fiber connection can cause failure of the component or failure of the whole
system. A particle that partially or completely blocks the core generates strong back reflections, which
can cause instability in the laser system. Inspection, cleaning, and reinspection are critical steps to take
before making fiber-optic connections.
How to Cable the 10GBE Line Interface Ports
Take the appropriate fiber optic cable (see
Step 1
appropriate port on the 10GBE interface on the SPA module in slot #3 of the Cisco SCE8000. (See
Figure 6-1
Make sure to push on the connector until you hear a click, which indicates that the connector is fully
inserted and secured in the receptacle. Always make sure that you insert the connector completely into
the socket.
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
6-10
Fiber Specifications
Transceiver
850nm
multi-mode
1310nm FRP laser
single mode
below.)
Chapter 6
Cabling the Line Ports and Completing the Installation
Transmit Power
Receive Power
–9.5 to –4 dBm
–17 to 0 dBm
–9.5 to –3 dBm
–20 to 3 dBm
Fiber Specifications, page
Typical (Max.)
Distance
750m for
•
50µm Core
Diameter
MMF
400m for
•
62.5µm Core
Diameter
MMF
10 km for 9.0µm
Core Diameter
SMF
6-10) and plug it into the
OL-16478-03
Advertisement
Table of Contents
Troubleshooting
