Verifying The System After Initial Boot - Cisco ASR 9000 Getting Started Manual
Cisco systems router getting started guide
Hide thumbs
Also See for ASR 9000:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Verifying the System After Initial Boot
The secret line in the configuration command script shows that the password is encrypted. When you
type the password during configuration and login, the password is hidden.
Verifying the System After Initial Boot
To verify the status of the router, perform the following procedure:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command or Action
Step 1
show version
Example:
RP/0/RSP0/CPU0:router# show version
Step 2
admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 3
show platform [node-id]
Example:
RP/0/RSP0/CPU0:router# show platform
Step 4
exit
Example:
RP/0/RSP0/CPU0:router# exit
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
2-4
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
show version
admin
show platform [node-id]
exit
show redundancy
show environment
Chapter 2
Bringing Up Cisco IOS XR Software on the Router
Purpose
Displays information about the router, including image names,
uptime, and other system information.
Places the router in administration EXEC mode, displays
information about the status of cards and modules installed in
the router, and terminates administration EXEC mode.
A card module is also called a node. When a node is working
properly, the status of the node in the State column is
IOS XR RUN.
Use the show platform node-id command to display
information for a specific node. Replace node-id with a node
name from the show platform command Node column.
To view the status of all cards and modules, the show
Note
platform command must be executed in administration
EXEC mode.
Exits the EXEC mode.
OL-17502-01
Advertisement
Table of Contents
