Cisco ASR 9000 Getting Started Manual page 34
Cisco systems router getting started guide
Hide thumbs
Also See for ASR 9000:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Verifying the System After Initial Boot
Configuration register on node 0/RSP0/CPU0 is 0x2
Boot device on node 0/RSP0/CPU0 is disk0:
--More--
show platform Command: Example
The show platform command displays information on router resources. In EXEC mode, the show
platform command displays the resources assigned to the RP you are managing. In administration
EXEC mode, the show platform command displays all router resources.
RP/0/RSP0/CPU0:router# show platform
Node
-----------------------------------------------------------------------------
0/RSP0/CPU0
0/1/CPU0
0/4/CPU0
0/6/CPU0
The following administration EXEC mode example shows all router nodes:
RP/0/RSP0/CPU0:router# admin
RP/0/RSP0/CPU0:router(admin)# show platform
Node
-----------------------------------------------------------------------------
0/RSP0/CPU0
0/FT0/SP
0/FT1/SP
0/1/CPU0
0/4/CPU0
0/6/CPU0
0/PM0/SP
0/PM1/SP
0/PM2/SP
The following example shows information for a single node in the router:
R
P/0/RSP0/CPU0:router# show platform 0/1/CPU0
Node
-----------------------------------------------------------------------------
0/1/CPU0
For more information on node IDs, see Cisco IOS XR System Management Configuration Guide.
For more information on the show platform command, see Cisco IOS XR Interface and Hardware
Component Command Reference.
show redundancy Command: Example
To view information about the active and standby (inactive) RPs, type the show redundancy command
as follows:
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
2-6
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
Type
A9K-RSP-4G-HDD(Active)
A9K-40GE-B
A9K-8T/4-B
A9K-4T-B
Type
A9K-RSP-4G-HDD(Active)
FAN TRAY
FAN TRAY
A9K-40GE-B
A9K-8T/4-B
A9K-4T-B
A9K-3KW-AC
A9K-3KW-AC
A9K-3KW-AC
Type
A9K-40GE-B
Chapter 2
Bringing Up Cisco IOS XR Software on the Router
State
Config State
IOS XR RUN
PWR,NSHUT,MON
IOS XR RUN
PWR,NSHUT,MON
IOS XR RUN
PWR,NSHUT,MON
IOS XR RUN
PWR,NSHUT,MON
State
Config State
IOS XR RUN
PWR,NSHUT,MON
READY
READY
IOS XR RUN
PWR,NSHUT,MON
IOS XR RUN
PWR,NSHUT,MON
IOS XR RUN
PWR,NSHUT,MON
READY
PWR,NSHUT,MON
READY
PWR,NSHUT,MON
READY
PWR,NSHUT,MON
State
Config State
IOS XR RUN
PWR,NSHUT,MON
OL-17502-01
Advertisement
Table of Contents
