Cli Prompt - Cisco ASR 9000 Getting Started Manual
Cisco systems router getting started guide
Hide thumbs
Also See for ASR 9000:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Logging In to a Router
•
•
The username and password validation method that your router uses is determined by the router
configuration. For information on configuring username and password validation methods, see the Cisco
ASR 9000 Series Aggregation Services Router System Security Configuration Guide. For information on
which username and password to use, see your system administrator.
To log in to the router, enter your username and password when prompted. For example:
User Access Verification
Username: cisco
Password: password
RP/0/RSP0/CPU0:router#
Passwords are case sensitive. If you want to log in to the router using a root-system username, type the
Note
username in the following format: username@admin. To support admin login, local database
authentication must be enabled with the aaa authentication login remote local command. For more
information, see the Cisco ASR 9000 Series Aggregation Services Router System Security Configuration
Guide.
After you log in, the router displays the CLI prompt, which is described in the
page
For information on how privileges are assigned to usernames, see the Cisco ASR 9000 Series
Aggregation Services Router System Security Configuration Guide.
CLI Prompt
After you log in, you see the CLI prompt for Cisco IOS XR Software. This prompt identifies the router
to which you are issuing commands. The CLI prompt represents the path, through the router, to the CPU
that executes the commands you enter. The syntax for the CLI prompt is: type/rack/slot/module:
router-name#. The CLI prompt is described in
Table 3-1
Prompt Syntax Components
type
rack
slot
module
router-name
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
3-6
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
A Remote Authentication Dial In User Service
A Terminal Access Controller Access-Control System Plus (TACACS+) server
3-6. The command set that you can use is determined by the privileges assigned to your username.
CLI Prompt Description
(
RADIUS) server
Table
3-1.
Description
Type of interface or card with which you are communicating. For
most user communication tasks, the type is "RP."
Rack number. In a standalone router, the rack number is always "0."
Slot in which the RSP is installed. In a Cisco ASR 9000 Series router,
the RSP physical slot number is "RSP0" or "RSP1."
Entity on a card that executes user commands or communicates with
a port (interface). For executing commands from the EXEC prompt,
the module is the "CPU0" of the RP. "CPU0" also controls the
forwarding and operating system (OS) functions for the system.
Hostname of the router. The hostname is usually defined during
initial configuration of the router, as described in the
the RSP Hostname" section on page
Chapter 3
Configuring General Router Features
"CLI Prompt" section on
"Configuring
3-32.
OL-17502-01
Advertisement
Table of Contents
