Managing Configuration Sessions
!
line console
--More--
To display the sanitized administration portion of the running configuration, connect to the RSP and type
the show running-config sanitized command in administration EXEC or administration configuration
mode, as shown in the following example:
RP/0/RSP0/CPU0:router(admin)# show running-config sanitized
Building configuration...
sdr <removed>
location 0/1/* primary
!
username <removed>
secret 5 <removed>
group root-system
!
end
Viewing the Target Configuration
The target configuration includes the configuration changes that have been entered but not yet
committed. These changes are not yet part of the running configuration.
You can view the target configuration in global configuration and administration configuration modes.
You cannot view the target configuration in EXEC modes because the target configuration must be
committed or abandoned before returning to EXEC or administration EXEC mode.
To display the target configuration changes you have entered for an RSP, type the show configuration
command in global configuration mode or in any submode, as shown in the following example:
RP/0/RSP0/CPU0:router(config-if)# show configuration
Building configuration...
interface tunnel-te2
description faq
!
end
To display the target administration configuration changes you have entered, type the show
configuration command in administration configuration mode or in any submode, as shown in the
following example:
RP/0/RSP0/CPU0:router(admin-config-sdr:test)# show configuration
Building configuration...
sdr test
location 0/1/SP
!
end
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
3-24
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
Chapter 3
Configuring General Router Features
OL-17502-01