Table of Contents
Advertisement
2. Puncher Unit (option)
A.Puncher Driving System
(1)Removing the Punch Motor
1) Remove the two screws [1].
2) Disconnect the connector [2] to remove the punch motor [3].
[2]
[1]
Fig.F03-201-01
(2)Removing the Horizontal Registration Motor
1) Disconnect connector [1].
2) Remove the harness [3] from the harness guide [2].
3) Remove the two screws [4] to remove the horizontal registration
motor [5].
[4]
[5]
Fig.F03-201-02
(3)Removing the Punch Unit
1) Remove the waste case.
2) Remove the screw [1] to detach the jam processing cover [2].
[1]
Fig.F03-201-03
[3]
[3]
[1]
[2]
[2]
AR-FN7/PN1 DISASSEMBLY AND ASSEMBLY 5-13
3) Disconnect the connector [3]
4) Remove the harness [5] from the harness guide [4].
[4]
Fig.F03-201-04
5) Disconnect the connector [6].
6) Remove the screw [7] and sensor support plate [8].
[7]
[8]
Fig.F03-201-05
7) Remove the screw [9] and washer [10].
8) Disconnect the connector [11].
9) Remove the two screws [12] to detach the base cover [13].
[11]
Fig.F03-201-06
[3]
[5]
[6]
[9]
[10]
[13]
[12]
Advertisement
Table of Contents
Troubleshooting
