Table of Contents
Advertisement
7) Remove the stop ring [10], and detach the timing belt [11].
8) Disconnect the connector [12], and free the harness [14] from the
edge saddle [13].
[11]
[10]
Fig.F03-102-23
9) Remove the two screws [15], and slide the processing tray assembly
[16] to the rear; then, lift it to detach.
[16]
[15]
Fig.F03-102-24
[12]
[14]
[13]
AR-FN7/PN1 DISASSEMBLY AND ASSEMBLY 5-7
(6) Removing the Paddle Assembly
1) Remove the processing tray assembly. (See 1.B.(3).)
2) Place the processing tray assembly [1] as shown.
NOTE: Be sure to take care not to damage the aligning plate [2].
[2]
Fig.F03-102-25
3) Detach the timing belt [3], and remove the two screws [4].
[4]
Fig.F03-102-26
4) Separate the processing tray assembly [5] and the paddle assembly
[6] as shown.
[5]
Fig.F03-102-27
[1]
[3]
[4]
[6]
Advertisement
Table of Contents
Troubleshooting
