Table of Contents
Advertisement
[10] SIMULATIONS
1. Finisher/Saddle unit
Error
Staple absent
The stapler is not set.
Staple absent
The staple cartridge has run out of
staples.
Mixed sheets
Sheets of different sizes are deposited
in the compartment.
Overstacking for
The number of sheets in the
stapling
compartment has exceeded the limit
imposed on stapling.
Stack tray
The number of sheets deposited on the
overstacking
delivery tray has exceeded the limit
imposed on the tray (sheets, sets).
Saddle overstacking Remove the stack from the bind tray.
More than 10 stacks are deposited on
the folded stack tray.
2. Puncher unit (option)
Error
Waste case full
The amount of waste paper in the
waste case has reached the limit.
Excess water
The amount of waste paper in the
waste case has exceeded the limit.
Condition
Timing of detection
Monitoring at all times The staple/fold motor (FFSM) and the
Monitoring at all times Normal operation will continue;
When a sheet of a
different size is placed.
When an extra sheet is
placed.
When an extra sheet is
placed.
When an extra sheet is
placed.
Condition
Timing of detection
During punching.
During punching.
AR-FN7/PN1 SIMULATIONS 10-1
Operation
slide motor (FSM) will stop.
however, operation is subject to
instructions from the host machine.
The sheet will be aligned based on
maximum size width and delivered as a
stack.
The sheets will be delivered with
stapling.
Normal operation will continue.
Normal operation will continue.
Operation
Normal operation will continue.
Punching will be disabled.
Resetting
Set the stapler.
Replace the staple
cartridge;
or, set it correctly.
-
-
Remove the sheets
from the delivery tray.
Remove the stack from
the bind tray.
Resetting
Remove the waste
paper from the waste
case.
Remove the waste
paper from the water
case.
Advertisement
Table of Contents
Troubleshooting
