Table of Contents
Advertisement
Description of Function Codes
8: Communication setting
•
The output voltage is set by the host computer by means of communication.
The voltage source for V/F separation is set in the same way as the frequency source. For
details, see P0-03. 100.0% of the setting in each mode corresponds to the rated motor voltage. If
the corresponding value is negative, its absolute value is used.
Function
Code
P3-15
P3-15 indicates the time required for the output voltage to rise from 0 V to the rated motor
voltage shown as t1 in the following figure.
Figure 5-5 Voltage of V/F separation
Group P4: Input Terminals
The PE6000 provides five DI terminals (DI5 can be used for high-speed pulse input) and two
analog input (AI) terminals.
Function
Code
P4-00
DI1 function selection
P4-01
DI2 function selection
P4-02
DI3 function selection
P4-03
DI4 function selection
P4-04
DI5 function selection
Parameter Name
Voltage rise time of V/F separation
Parameter Name
Default
1: Forward RUN (FWD)
2: Reverse RUN (REV)
4: Forward JOG (FJOG)
9: Fault reset (RESET)
12: Multi-reference terminal 1
100
PE6000 User Manual
Setting Range
0.0–1000.0s
Remark
Standard
Standard
Standard
Standard
Standard
Default
0.0s
Hide quick links:
Advertisement
Table of Contents
