Advertisement
CHAPTER 3 MECHANICAL SYSTEMS
2) With the paper fold rollers and saddle
cam positioned as shown in Figure F03-
102-14, mount gears as shown in figure
F03-102-15.
• Align the
mark (either of two
marks) on the saddle cam drive gear [3]
with the
mark on the relay gear [4]
(on the half of the periphery where
gears with a smaller face width are ar-
ranged).
• With the
mark on the saddle cam
drive gear [3] aligned with the
on the relay gear [4], align the other
mark on the relay gear withy the rib of
the paper folding roller drive gear [5].
1.2.4 Removing the Saddle Unit
1) Remove the front cover. (See 1.1.2.)
2) Remove the rear cover. (See 1.1.3.)
3) Open the jam removal cover [1]; then,
remove the two screws [2] and the right
stay [3].
3-14
COPYRIGHT © 2001 CANON INC.
Chap03.p65
mark
[2]
2000 2000 2000 2000
14
F03-102-15
[3]
F03-102-16
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3/28/01, 12:09 PM
[3]
[4]
[5]
[2]
[1]
Advertisement
