Advertisement
2.2.2 Removing the PhotoSensor PCB
1) Remove the punch motor. (See 2.1.1.)
2) Remove the screw [1].
3) Remove the harness [3] from the harness
guide [2] on the PCB, then detach the
PCB cover [4].
4) Disconnect the connector [5] to remove
the photosensor PCB [6].
COPYRIGHT © 2001 CANON INC.
Chap03.p65
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
39
CHAPTER 3 MECHANICAL SYSTEMS
[1]
[4]
F03-202-02
[6]
F03-202-03
3/28/01, 12:09 PM
[3]
[2]
[5]
3-39
Advertisement
