Advertisement
1.3.2 Removing the Slide Home Position PCB
1) Open the front door [1], and turn the tab
[2] on the stapler slide in the direction
of the arrow to slide the stapler to the
frontmost point.
2) Remove the stapler unit. (See 1.2.1.)
3) Place the stapler unit [3] as shown.
4) Remove the two screws [4], and detach
the guide [5].
5) Turn the tab [2] on the stapler side in
the direction of the arrow so that that
the fixing screw [7] of the slide home
position PCB [6] is in view through the
round hole.
6) Remove the fixing screw [7].
COPYRIGHT © 2001 CANON INC.
Chap03.p65
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
33
CHAPTER 3 MECHANICAL SYSTEMS
[1]
F03-103-02
[4]
[5]
[4]
F03-103-03
[6]
[7]
F03-103-04
3/28/01, 12:09 PM
[2]
[3]
[2]
3-33
Advertisement
