Advertisement
6 Puncher Unit (option)
6.1 Basic Operations
6.1.1 Outline
The puncher unit is an option, and is designed for installation to the pickup assembly of
the finisher. The puncher unit is not equipped with a paper feeding mechanism, and the
sheets from the host machine move through the puncher unit and then the feed system of the
finisher.
When the trailing edge of a sheet from the host machine reaches the puncher unit, the
sheet is stopped once, and the punch shaft is rotated to punch a hole along the trailing edge.
These operations are controlled with various commands from the finisher controller PCB as
well as the commands from the punch controller PCB.
COPYRIGHT © 2001 CANON INC.
Chap02.p65
CHAPTER 2 OUTLINE OF OPERATION
Punch controller PCB
F02-601-01
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
49
Punch drive system
Horizontal registration
drive system
3/28/01, 12:07 PM
2-49
Advertisement
