Advertisement
[1] INTRODUCTION
1. Product outline
This unit is installed to the following machines to perform the after-process of output paper from a printer, a copier, or a fax machine.
A. Features
1) Employment of the through-type stapler
Employment of the through-type stapler allows to make saddle stitch by one stapler.
2) 3 kinds of auto staple functions
There are 3 staple positions available. (One position in the front, one position at the back, 2 positions at the center)
3) Saddle stitch function
Up to 10 sheets of paper can be stapled at the center and folded into two and discharged.
4) Punch function (Option)
By installation of a puncher unit, paper can be punched to make holes for a binder. (Applicable for 64 - 128g/m². OHP films cannot be used.)
Applicable models
AR-P350 / P450, AR-M350 / M450
DM-3500 / 3501 / 4500 / 4501, DM-3551 / 4551
2. Configuration
1. Before installation of this unit, the large-capacity tray (AR-DU3 or AR-DU4) must be installed in advance.
(When installing the AR-DU3/DU4, the option power unit (AR-DC1) is required.)
2. When installing this unit, the duplex module (AR-DU3) must be installed together.
3. This unit cannot be installed with the following units:
•Duplex module (AR-DU4) with the manual paper feed tray
•Paper exit tray (AR-TE4)
•Multi-purpose tray (AR-MU1)
•Finisher (AR-FN6)
Simultaneous
installation
not allowed
Simultaneous
installation is required
AR-FN7
AR-D14
Output units
Saddle stitch finisher
Punch unit
*1
=Any of the units must be installed together.
AR-TE4
AR-DU4
AR-DU3
Simultaneous installation not allowed
AR-FN7
AR-PN1
AR-FN7/PN1 INTRODUCTION-1
Simultaneous installation not allowed
AR-MU1
AR-DC1
Simultaneous installation is required
*1
*1
AR-FN6
AR-D13
Advertisement
