Advertisement
CHAPTER 2 OUTLINE OF OPERATION
7.1.4 Folding Position Sensor Stationary Jam (1022)
In bind mode, paper does not leave the holding position sensor approximately 10.5 sec
after the staple/fold motor is driven.
Jam check
Folding position
sensor (PI10)
Staple/fold
motor (M7)
7.1.5 Power-On Jam (1007)
Paper is detected inside the finisher at power-on or when the door is closed.
7.1.6 Door Open Jam (paper present) (1008)
The finisher is disconnected from its host machine or the front door, or the upper cover is
opened while the system is in operation (paper on the move).
7.1.7 Staple Jam (1006)
The staple home position sensor (PI19) does not go OFF 600 msec after the stapler is
driven. Or, it does not return to its home position (where the sensor goes ON).
2-62
COPYRIGHT © 2001 CANON INC.
Chap02.p65
approx. 10.5sec.
Jam check
Normal
Folding position
sensor (PI10)
Staple/fold
motor (M7)
F02-701-05
2000 2000 2000 2000
62
approx. 10.5sec.
Jam
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3/28/01, 12:07 PM
Advertisement
