Show Cts Sxp - Cisco Nexus 7000 Series Command Reference Manual
Hide thumbs
Also See for Nexus 7000 Series:
- Reference manual (746 pages) ,
- Configuration manual (536 pages) ,
- Hardware installation and reference manual (508 pages)
Table of Contents
Advertisement
Show Commands
show cts sxp
To display Cisco TrustSec Security Group Tag (SGT) Exchange Protocol (CTS-SXP) connection or source
IP-to-SGT mapping information, use the show cts sxp command in user EXEC or privileged EXEC mode.
show cts sxp {connections | sgt-map} [detail | vrf instance-name]
Syntax Description
connections
sgt-map
detail
vrf instance-name
Command Default
None
Command Modes
Any command mode
Command History
Release
8.0(1)
7.3(0)D1(1)
4.0(1)
Examples
The following example displays the CTS-SXP connections:
switch# show cts sxp connections
SXP
Default Password : Set
Default Source IP: Not Set
Connection retry open period: 10 secs
Reconcile period: 120 secs
Retry open timer is not running
----------------------------------------------
Peer IP
Modification
The keywords connections, sgt-map, detail, and vrf were introduced.
The output was modified to include details about the SXPv3 version and
network map expansion limit.
This command was introduced.
: Enabled
: 10.10.10.1
Displays Cisco TrustSec SXP connections
information.
Displays the IP-to-SGT mappings received through
SXP.
(Optional) Displays detailed SXP information.
(Optional) Displays the SXP information for the
specified Virtual Routing and Forwarding (VRF)
instance name.
Cisco Nexus 7000 Series Security Command Reference
show cts sxp
755
Advertisement
Table of Contents
