Cisco Nexus 7000 Series Command Reference Manual page 698

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

statistics per-entry

• show ip access-lists

• show ipv6 access-lists

• show mac access-lists

To clear per-entry statistics, use the clear access-list counters command or the applicable following command:

• clear ip access-list counters

• clear ipv6 access-list counters

• clear mac access-list counters

• clear vlan access-list counters

This command does not require a license.

This example shows how to start recording per-entry statistics for an IPv4 ACL named ip-acl-101:

switch(config)# ip access-list ip-acl-101

switch(config-acl)# statistics per-entry

switch(config-acl)#

This example shows how to stop recording per-entry statistics for an IPv4 ACL named ip-acl-101:

switch(config)# ip access-list ip-acl-101

switch(config-acl)# no statistics per-entry

switch(config-acl)#

This example shows how to start recording per-entry statistics for the ACLs in entry 20 in a VLAN access-map

named vlan-map-01:

switch(config)# vlan access-map vlan-map-01 20

switch(config-access-map)# statistics per-entry

switch(config-access-map)#

This example shows how to stop recording per-entry statistics for the ACLs in entry 20 in a VLAN access-map

named vlan-map-01:

switch(config)# vlan access-map vlan-map-01 20

switch(config-access-map)# no statistics per-entry

switch(config-access-map)#

Related Commands

show access-lists

clear access-list counters

Cisco Nexus 7000 Series Security Command Reference

Displays all IPv4, IPv6, and MAC ACLs, or a specific

Clears per-entry statistics for all IPv4, IPv6, and MAC

ACLs, or for a specific ACL.