Source-Interface - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

source-interface

To assign a source interface for a specific RADIUS or TACACS+ server group, use the source-interface

command. To revert to the default, use the no form of this command.

source-interface interface

no source-interface

Syntax Description

Command Default

The default is the global source interface.

Command Modes

RADIUS configurationTACACS+ configuration

Command History

Usage Guidelines

The source-interface command to override the global source interface assigned by the ip radius

source-interface command or ip tacacs source-interface command.

You must use the feature tacacs+ command before you configure TACACS+.

This command does not require a license.

This example shows how to enter IP access list configuration mode for an IPv4 ACL named ip-acl-01:

switch# configure terminal

switch(config)# ip radius source-interface mgmt 0

switch(config-radius)# source-interface ethernet 2/1

Related Commands

feature tacacs+

ip radius source-interface

Source interface. The supported interface types are

ethernet, loopback, and mgmt 0.

Modification

This command was introduced.

Enables the TACACS+ feature.

Configures the global source interface for the

RADIUS groups configured on the Cisco NX-OS

Cisco Nexus 7000 Series Security Command Reference

source-interface