Table of Contents
Advertisement
7.1
RAID driver installation
After creating the RAID sets for your server system, you are now ready to install an
operating system to the independent hard disk drive or bootable array. This part provides the
instructions on how to install the RAID controller drivers during OS installation.
7.1.1
Creating a RAID driver disk
The system does not include a floppy drive. You have to use a USB floppy drive when
creating a SATA RAID driver disk.
If you have created RAID sets with the LSI Software RAID configuration utility, the boot
priority of the SATA optical disk drive has to be manually adjusted. Otherwise, the system
will not boot from the connected SATA ODD.
To create a RAID driver disk in Windows
1.
Start Windows
2.
Place the motherboard support DVD into the optical drive.
3.
Go to the Make disk menu, and then select the type of RAID driver disk you want to
create.
4.
Insert a floppy disk into the USB floppy disk drive.
5.
Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.
To create a RAID driver disk in Red Hat
1.
Insert a blank formatted high-density floppy disk to the USB floppy disk drive.
Type dd if=XXX.img of=/dev/fd0 to decompress the file into the floppy disk from
2.
the following path in the support DVD:
For LSI MegaRAID Driver
\Drivers\C610 LSI RAID\Driver\makedisk\Linux
3.
Eject the floppy disk.
7-2
®
.
®
Enterprise Linux server environment
®
environment
Chapter 7: Driver installation
Advertisement
Chapters
Table of Contents
