Table of Contents
Advertisement
6.2.3
Initializing the virtual drives
After creating the RAID set(s), you must initialize the virtual drives. You may initialize the
virtual drives of a RAID set(s) using the Initialize or Objects command on the Management
Menu.
Using the Initialize command
To initialize the virtual drive using the Initialize command
1.
From the Management Menu, select Initialize, and then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
2.
The screen displays the available RAID set(s) and prompts you to select the virtual
drive to initialize. Use the arrow keys to select the virtual drive from the Virtual Drive
selection, and then press <Space>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
6-12
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version
Initialize VD(s)
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version
Easy Configuration - ARRAY SELECTION MENU
LD
RAID
0
Virtual Drives
Virtual Drive 0
Select VD
SPACE-(De)Select, F10-Initialize
A.10.09231523R
A.10.09231523R
Virtual Drive(s) Configured
Size
#Stripes
1
148.580GB
2
StripSz
Status
64KB
ONLINE
Chapter 6: RAID configuration
Advertisement
Chapters
Table of Contents
