Table of Contents
Advertisement
C/A Parity Enable [Auto]
Allows you to enable or disable the DDR4's command address parity.
Configuration options: [Auto] [Disabled] [Enabled]
Memory Topology
Displays memory topology with DIMM population information.
Memory Thermal
Allows you to configure thermal settings.
Set Throttling Mode [Disabled]
Configuration options: [Disabled] [OLTT] [CLTT]
OLLT Peak BW [xxx]
Allows you to set the peak allowed bandwidth for OLTT. This is in percentage and valid
offset values is from 25-100.
DIMM Tem Stat [xx]
Allows you to select DIMMTEMPSTAT as temp_mid or tem_hi.
Memory Power Savings Mode [Auto]
Allows you to configure the CKE and other related Memory Power Savings features.
Configuration options: [Auto] [Disabled] [APD On] [User Defined] [Reserve] [Reserved]
Memory Power Savings Advanced Options
CK in SR [Auto]
Configuration options: [Auto] [Driven] [Tri-State] [Pulled Low] Pulled High]
MDLL Off [Auto]
Allows you to shutdown MDLL during SR when enabled.
Configuration options: [Auto] [Disabled] [Enabled]
MEMHOT Throttling Mode [Input-only]
Allows you to shutdown MDLL during SR when enabled.
Configuration options: [Disabled] [Input-only] [Output-only]
RS720Q-E8-RS12
5-31
Advertisement
Chapters
Table of Contents
