Enabling Mldp Recursive Fec - Cisco CRS Configuration Manual
Ios xr mpls configuration guide
Hide thumbs
Also See for CRS:
- User manual (304 pages) ,
- Configuration manual (292 pages) ,
- Command reference manual (155 pages)
Table of Contents
Advertisement
Implementing MPLS Label Distribution Protocol
Command or Action
Enabling MLDP Recursive FEC
Perform this task to enable recursive forwarding equivalence class (FEC) support in MPLS MLDP.
SUMMARY STEPS
1. configure
2. mpls ldp
3. mldp
4. address-family ipv4
5. recursive-fec
6. end or commit
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
mpls ldp
Example:
RP/0/RP0/CPU0:router(config)# mpls ldp
Step 3
mldp
Example:
RP/0/RP0/CPU0:router(config-ldp)# mldp
Purpose
• Entering cancel leaves the router in the current configuration
session without exiting or committing the configuration
changes.
• Use the commit command to save the configuration changes
to the running configuration file and remain within the
configuration session.
Purpose
Enters Global Configuration mode.
Enters MPLS LDP configuration mode.
Enables MLDP.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
Enabling MLDP
73
Advertisement
Table of Contents
