Enabling Mldp Mofrr - Cisco CRS Configuration Manual
Ios xr mpls configuration guide
Hide thumbs
Also See for CRS:
- User manual (304 pages) ,
- Configuration manual (292 pages) ,
- Command reference manual (155 pages)
Table of Contents
Advertisement
Implementing MPLS Label Distribution Protocol
Command or Action
address-family ipv4
Step 5
make-before-break [delay seconds]
Example:
RP/0/RP0/CPU0:router(config-ldp-mldp-af)#
make-before-break delay 10
Step 6
end or commit
Example:
RP/0/RP/0/RP0/CPU0:router
(config-ldp-mldp-af)# end
or
RP/0/RP/0/RP0/CPU0:router
(config-ldp-mldp-af)# commit
Enabling MLDP MoFRR
Perform this task to enable multicast only fast reroute (MoFRR) support in MPLS MLDP.
SUMMARY STEPS
1. configure
2. mpls ldp
3. mldp
4. address-family ipv4
5. mofrr
6. end or commit
Purpose
Enables the make-before-break feature.
(Optional) Configures the MBB forwarding delay in seconds. Range
is 0 to 600.
• When you issue the end command, the system prompts you to
commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
• Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and returns
the router to EXEC mode.
• Entering no exits the configuration session and returns the
router to EXEC mode without committing the configuration
changes.
• Entering cancel leaves the router in the current configuration
session without exiting or committing the configuration
changes.
• Use the commit command to save the configuration changes
to the running configuration file and remain within the
configuration session.
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
Enabling MLDP
71
Advertisement
Table of Contents
