Disabling Ldp Igp Synchronization: Ospf - Cisco CRS Configuration Manual
Ios xr mpls configuration guide
Hide thumbs
Also See for CRS:
- User manual (304 pages) ,
- Configuration manual (292 pages) ,
- Command reference manual (155 pages)
Table of Contents
Advertisement
Implementing MPLS Label Distribution Protocol
Command or Action
Step 9
show mpls ldp { ipv4 }igp sync
Example:
RP/0/RP0/CPU0:router# show mpls ldp ipv4 igp sync
Related Topics
IGP Synchronization, on page 17
Configuring LDP IGP Synchronization—OSPF: Example, on page 83
Disabling LDP IGP Synchronization: OSPF
Perform this task to disable LDP IGP Synchronization under OSPF.
You can disable LDP IGP synchronization on a per-interface basis. This lets LDP enable all IGP interfaces
except those that are explicitly disabled.
SUMMARY STEPS
1. configure
2. router ospf process-name
3. (Optional) vrf vrf-name
4. Use one of the following commands:
5. (Optional) Use one of the following commands:
6. Use the commit or end command.
• area area-id mpls ldp sync disable
• area area-id interface name mpls ldp sync disable
• area area-id mpls ldp sync disable
• area area-id interface name mpls ldp sync disable
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
Disabling LDP IGP Synchronization: OSPF
Purpose
(Optional)
Displays the LDP IGP synchronization information for
IPv4 address families.
53
Advertisement
Table of Contents
