Cisco CRS Configuration Manual page 152
Ios xr mpls configuration guide
Hide thumbs
Also See for CRS:
- User manual (304 pages) ,
- Configuration manual (292 pages) ,
- Command reference manual (155 pages)
Table of Contents
Advertisement
Configuring Global Configuration Mode RSVP Authentication
SUMMARY STEPS
1. configure
2. rsvp authentication
3. key-source key-chain key-chain-name
4. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
rsvp authentication
Example:
RP/0/RP0/CPU0:router(config)# rsvp
authentication
RP/0/RP0/CPU0:router(config-rsvp-auth)#
Step 3
key-source key-chain key-chain-name
Example:
RP/0/RP0/CPU0:router(config-rsvp-auth)#
key-source key-chain mpls-keys
Step 4
Use the commit or end command.
Related Topics
Key-source Key-chain, on page 121
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
134
Implementing RSVP for MPLS-TE and MPLS O-UNI
Purpose
Enters global configuration mode.
Enters RSVP authentication configuration mode.
Specifies the source of the key information to authenticate RSVP
signaling messages.
key-chain-name
Name of the keychain. The maximum number of characters is
32.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration session, without
committing the configuration changes.
Advertisement
Table of Contents
