Ceiling Mount Unit: Pdk-5012; Specifications - Pioneer PDP-425CMX Technical Manual
For pioneer plasma display monitor when used with video cards (expansion solutions cards)
Hide thumbs
Also See for PDP-425CMX:
- Technical manual (188 pages) ,
- Service manual (184 pages) ,
- Operating instructions manual (98 pages)
Table of Contents
Advertisement
Ceiling Mount Unit: PDK-5012
4.8 Ceiling Mount Unit: PDK-5012
4.8.1 Specifications
External dimensions ................. 1022 mm (W) × 1062 mm (H) × 300 mm (D)
Weight ....................................... 14.5 kg (32.0 lbs.) (mounting hardware only)
Adjustable range of angles ...... Horizontal to 25 degrees below horizontal, 45 degrees left/right
Material ...................................... Steel pipe for general structure (STKM-R), STK, SPHC
Finish .......................................... Semi-matte black paint (Original Pioneer color)
Package dimensions ................. 1035 (W) × 360 (H) × 540 (D) mm
Package weight ......................... 21.5 kg
Layers of packing ...................... 10 layers
Components
PDP bracket ........................................................ × 1
Bolt M8 ............................................................... × 6
Special screw ...................................................... × 4
Hole cover ........................................................... × 1
Stencil (printed on the wrapping
material that is inside) ......................................... × 1
Installer's contact information (Japan only) ......... × 1
Operating instructions ......................................... × 1
The appropriate types of screws and other mounting hardware will depend on the strength and composition of the
ceiling. Purchase them separately.
✩ Operating Temperature Restrictions
• Ambient Temperature: 0 °C to 40 °C
✩ Operating Temperature Restrictions for Upside-Down Installations
• Ambient temperature:
• Other factors:
✩ Operating temperature restrictions for when the speaker system (PDP-S44-LR) is attached.
• Ambient temperature:
*1
For this installation, set the 'FAN CONTROL' to 'MAX' as shown in "5.4.3 Adjustment and Setting in the Integrator Mode 14)
Cooling Fan Control Setting" (pg. 172).
*2
When INPUT2 has been selected, use input compatible signal up to 1280x1024 (60 Hz) at ambient temperature condition of 0 °C
to 35 °C.
76
(40-1/4 in. (W) × 41-3/4. (H) × 11-3/4 in. (D))
(mounting hardware and Plasma Display)
45.0 kg (99.2 lbs.) (mounting hardware and Plasma Display)
(40-3/4 (W) × 14-3/16 (H) × 21-1/4 (D) in.)
(47.4 lbs.)
0 °C to 40 °C
Maintain sufficient clearance between the display and the wall (at least 300 mm)
0 °C to 40 °C
(*1, *2)
- Quick Links:
- Specifications
- Controls and Connectors
Hide quick links:
Advertisement
Table of Contents
