Screen Burning - Pioneer PDP-425CMX Technical Manual
For pioneer plasma display monitor when used with video cards (expansion solutions cards)
Hide thumbs
Also See for PDP-425CMX:
- Technical manual (188 pages) ,
- Service manual (184 pages) ,
- Operating instructions manual (98 pages)
Table of Contents
Advertisement
Screen Burning
5.6 Screen Burning
When the same image is reproduced for a long period (still image, telop, etc.), the image is burned into to screen. It may
be difficult to remove this image. Burning should be managed by making necessary changes in the video software,
projection method, system configuration etc.
This display has a function that reduces this kind of burning.
7 Menu mode
1 ENERGY SAVE setting (Refer to section 5.3.4, "Adjustment and setting in the Menu Mode 4) Energy Saving
Setting" (pg. 119) and 5.3.7, "Adjustment and setting in the Menu Mode 12) Energy Saving Setting" (pg. 143).)
The screen brightness is controlled according to the input signal and by the brightness of the room.
2 ORBITER Setting (Refer to section 5.3.4, "Adjustment and setting in the Menu Mode 5) Orbiter Setting" (pg. 121)
and 5.3.7, "Adjustment and setting in the Menu Mode 13) Orbiter Setting" (pg. 145).)
This function gradually and randomly moves the image position vertically and/or horizontally after a set amount of
time. Or the edges of the images are restricted by setting soft focus in order to soften images edges.
7 Integrator Mode
1 SCREEN MASK Setting (Refer to section 5.4.3, "Adjustment and setting in the Integrator Mode 9) SCREEN
MASK Setting" (pg. 164).)
An inverse or full mask signal appears on the screen.
When a full mask is prepared beforehand, it becomes more difficult for the screen to become burned.
Using an inverse signal may be an emergency measure when the screen is burned from displaying a still image.
However, completely removing the burn is not possible.
2 SIDE MASK Setting (Refer to section 5.4.3, "Adjustment and setting in the Integrator Mode 10) SIDE MASK
Setting" (pg. 165).)
This setting adjusts the method of displaying the SIDE MASK signal and adjusts the signal level of the SIDE
MASK signal.
7 Menu Mode and Integrator Mode
1 PROGRAM TIMER Setting (Refer to section 5.3.4, "Adjustment and setting in the Menu Mode 11) Program Timer
Setting" (pg. 127) and 5.3.7, "Adjustment and setting in the Menu Mode 19) Program Timer Setting" (pg. 151),
"5.4.3, "Adjustment and setting in the Integrator Mode 8) Program Timer Setting" (pg. 163).)
The display contents change at a predetermined time according to set conditions.
7 Standard Functions (Settings cannot be changed)
1 Auto Brightness Adjustment (still image detection)
When an image that has little or no motion, such as a photograph or computer screen, is displayed for a long
period, the screen may appear dimmer. This feature is part of the screen-protection function, to automatically
adjust the brightness and protect the screen when an image with little or no motion is detected. This function
activates after an image with little or no motion has been detected for 3 minutes.
This function is not found in the menu (the setting cannot be changed).
Note
210
- Quick Links:
- Specifications
- Controls and Connectors
Hide quick links:
Advertisement
Table of Contents
