Integrator Mode
7) SUB VOLUME Setting
This item is for adjusting the audio input level for each input.
This is useful when adjusting the level between different sources, for example a DVD player and a PC.
After muting the audio before hand, enter the integrator mode and perform the adjustment.
1 Enter the integrator mode.
(Refer to section 5.4.1, "About the Integrator Mode" (pg. 154).)
2 Select 'SET UP'.
3 Place the cursor on 'SUB VOLUME' then press the [SET]
button.
4 Perform the adjustment.
Use the [2/3] buttons on the remote control or the main-
control panel to change settings.
Press the [SET] button to return to screen 3.
<Adjustable Range>
Each item: 0 to 20 (initial value: 20)
<Adjustment Order>
Performing adjustment in the following order is effective.
1. VOLUME (normal-operation mode): Raise the volume to the actual operating condition.
2. SUB VOLUME (integrator mode): Adjust the input with high volume to match the input with low volume.
1 AUDIO INPUT
(INPUT1)
Stereo mini jack
2 AUDIO INPUT
(INPUT2)
Stereo mini jack
3 AUDIO INPUT
#1
(INPUT3/4)
#2
(INPUT3)
Pin jack
4 AUDIO INPUT
#2
(INPUT4)
Pin jack
5 AUDIO INPUT
#
(INPUT5)
Pin jack
# : Applicable only when a PDA-5003/PDA-5004 is installed.
#1: Applicable only when a PDA-5003 is installed.
#2: Applicable only when a PDA-5004 is installed.
162
INPUT1
SUB VOLUME
INPUT2
SUB VOLUME
INPUT3
SUB VOLUME
INPUT4
SUB VOLUME
INPUT5
SUB VOLUME
Screen 3
I N T E G R AT O R
P I C T U R E
S C R E E N
B R T. E N H A N C E
S U B V O L U M E
ENTER
SET
Screen 4
S U B V O L U M E
SET
SET
INPUT
SELECTOR
VOLUME
Audio block diagram
(concept diagram)
I N P U T 1
S E T U P
O P T I O N
:
O F F
:
2 0
EXIT
MENU
:
2 0
EXIT
MENU
POWER
AMPLIFIER