Cisco Catalyst 2960 Command Reference Manual page 409

Hide thumbs Also See for Catalyst 2960:

Table of Contents

This is an example of output from the show lacp neighbor command:

Switch> show lacp neighbor

Channel group 3 neighbors

Partner's information:

Partner's information:

This is an example of output from the show lacp sys-id command:

Switch> show lacp sys-id

32765,0002.4b29.3a00

The system identification is made up of the system priority and the system MAC address. The first two

bytes are the system priority, and the last six bytes are the globally administered individual MAC address

associated to the system.

Related Commands

lacp port-priority

lacp system-priority

Use the show location user EXEC command to display location information for an endpoint.

Catalyst 2960 Switch Command Reference

S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs

A - Device is in Active mode

32768,0007.eb49.5e80

LACP Partner

Port Priority

32768,0007.eb49.5e80

LACP Partner

Port Priority

Clears the LACP channel-group information.

Configures the LACP port priority.

Configures the LACP system priority.

show location admin-tag | [ | {begin | exclude | include} expression]

show location civic-location {identifier id number | interface interface-id | static } | {begin |

exclude | include} expression]

show location elin-location {identifier id number | interface interface-id | static } | {begin |

exclude | include} expression]

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands

P - Device is in Passive mode