Cisco 7962G Administration Manual page 96
For cisco unified communications manager 6.0
Hide thumbs
Also See for 7962G:
- Administration manual (235 pages) ,
- User manual (110 pages) ,
- Specifications (5 pages)
Table of Contents
Advertisement
Device Configuration Menu
Table 4-14
Network Configuration Menu Options (continued)
Option
Description
CDP: PC Port
Indicates whether CDP is supported on
the PC port (default is enabled).
Enable CDP on the PC port when Cisco
VT Advantage/Unified Video
Advantage (CVTA) is connected to the
PC port. CVTA does not work without
CDP interaction with the phone.
Note
Note
CDP: SW Port
Indicates whether CDP is supported on
the switch port (default is enabled).
•
•
Note
Note
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
4-28
When CDP is disabled in Cisco
Unified Communications
Manager, a warning is
displayed, indicating that
disabling CDP on the PC port
prevents CVTA from working.
The current PC and switch port
CDP values are shown on the
Settings menu.
Enable CDP on the switch port for
VLAN assignment for the phone,
power negotiation, QoS
management, and 802.1x security.
Enable CDP on the switch port
when the phone is connected to a
Cisco switch.
When CDP is disabled in Cisco
Unified Communications
Manager, a warning is
presented, indicating that CDP
should be disabled on the
switch port only if the phone is
connected to a non-Cisco
switch.
The current PC and switch port
CDP values are shown on the
Settings menu.
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified
Communications Manager
Administration > Device > Phone.
Use Cisco Unified
Communications Manager
Administration > Device > Phone.
OL-12641-01
Advertisement
Table of Contents
Troubleshooting
