Network Configuration Menu - Cisco 7962G Administration Manual
For cisco unified communications manager 6.0
Hide thumbs
Also See for 7962G:
- Administration manual (235 pages) ,
- User manual (110 pages) ,
- Specifications (5 pages)
Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
The Network Configuration menu displays device-specific network configuration settings on the phone
Table 4-14
Note
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
information about the options on that menu, see the
Table 4-14
Network Configuration Menu Options
Option
Description
Load Server
Used to optimize installation time for
phone firmware upgrades and offload
the WAN by storing images locally,
negating the need to traverse the WAN
link for each phone's upgrade.
You can set the Load Server to another
TFTP server IP address or name (other
than the TFTP Server 1 or TFTP Server
2) from which the phone firmware can
be retrieved for phone upgrades. When
the Load Server option is set, the phone
contacts the designated server for the
firmware upgrade.
Note
RTP Control
Indicates whether the phone supports
Protocol
the Real-Time Control Protocol
(RTCP). Settings include:
•
•
If this feature is disabled, several call
statistic values display as 0. For
additional information, see the
following sections:
•
•
OL-12641-01
describes the options in this menu.
The Load Server option allows
you to specify an alternate
TFTP server for phone
upgrades only. The phone
continues to use TFTP Server 1
or TFTP Server 2 to obtain
configuration files. The Load
Server option does not provide
management of the process and
of the files, such as file transfer,
compression, or deletion.
Enabled
Disabled—default
Call Statistics Screen, page 7-12
Streaming Statistics, page 8-10
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
"Network Configuration Menu" section on page
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Device Configuration Menu
.
4-5.
4-27
Advertisement
Table of Contents
Troubleshooting
