Cisco 7962G Administration Manual page 89
For cisco unified communications manager 6.0
Hide thumbs
Also See for 7962G:
- Administration manual (235 pages) ,
- User manual (110 pages) ,
- Specifications (5 pages)
Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-10
Media Configuration Menu Options (continued)
Option
Description
Recording Tone
Indicates whether a recording tone
(often referred to as a beep tone) is
enabled or disabled for the phone. If the
recording tone option is enabled, the
phone plays the beep tone in both
directions of every call, regardless of
whether the call actually gets recorded.
The beep tone first sounds when a call
is answered.
You may want to notify your users if
you enable this option.
Default: Disabled
Related Parameters:
•
Recording Tone Local Volume
•
Recording Tone Remote Volume
Recording Tone Duration
•
Note
Recording Tone
Indicates the loudness setting for the
Local Volume
beep tone that is received by the party
whose phone has the Recording Tone
option enabled.
This setting applies for each listening
device (handset, speakerphone,
headset).
Range: 0 percent (no tone) to 100
percent (same level as current volume
setting on the phone).
Default: 100
See also: Recording Tone
OL-12641-01
Other related
parameters—Beep tone
frequency in hz, the length of
the beep tone (called duration),
and how often the beep tone
plays (called interval)—are
defined on a per-Network
Locale basis in the xml file that
defines tones. This xml file is
usually named tones.xml or
g3-tones.xml.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
To Change
From Cisco Unified Communications
Manager Administration, choose
> Device > Phone >
Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose
> Device > Phone >
Phone Configuration.
Device Configuration Menu
4-21
Advertisement
Table of Contents
Troubleshooting
