Cisco 8961 Administration Manual page 145
Administration guide for cisco unified communications manager 8.6 (sip)
Hide thumbs
Also See for 8961:
- Administration manual (378 pages) ,
- User manual (180 pages) ,
- Features (35 pages)
Table of Contents
Advertisement
Chapter 8
Configuring Features, Templates, Services, and Users
Table 8-1
Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Description
Intercom
Allows users to place and receive intercom calls
using programmable phone buttons. You can
configure intercom line buttons to:
Note
Note
Intelligent Session
Reroutes a enterprise originated call to a user's
Control
mobile phone to the enterprise number. The call
only rings the user's mobile but not the desk phone.
When the call is answered on the mobile phone, the
desk phone displays a Remote in Use message.
During these calls, a user can use the various
features of the mobile phone.
Line select
If this feature is disabled (default), then the ringing
line is selected. When enabled, the primary line is
picked up even if a call is ringing on another line.
The User must manually select the other line.
Note
Line select for voice
When disabled (default), pressing the Messages
messages
button selects the line that has a voice message. If
more than one line has voice mail, then the first
available line is selected. When enabled, the
primary line is always used to retrieve voice
messages.
Note
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Directly dial a specific intercom extension.
•
Initiate an intercom call and then prompt the
•
user to enter a valid intercom number.
If your user logs into the same phone on a
daily basis using their Cisco Extension
Mobility profile, assign the phone button
template that contains intercom
information to their profile, and assign the
phone as the default intercom device for
the intercom line.
Intercom feature does not support
Extension Mobility Cross Cluster.
This feature can also be enabled or
disabled for Extension Mobility.
This feature can also be enabled or
disabled for Extension Mobility.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, go to the
chapter" chapter in the Cisco Unified
Communications Manager Feature and
Services Guide.
For more information, go to the
Mobility" chapter in the Cisco Unified
Communications Manager Features and
Services Guide.
For more information, see the option "Always
use prime line" in the following chapters of
Cisco Unified Communications Manager
Administration Guide:
"Device Profile
•
"Common Phone Profile
•
"Cisco Unified IP Phone Services
•
Configuration"
For more information, see the option "Always
use prime line for voice message" in the
following chapters of Cisco Unified
Communications Manager Administration
Guide:
"Device Profile
•
"Common Phone Profile
•
"Cisco Unified IP Phone Services
•
Configuration"
"Intercom
"Cisco Unified
Configuration"
Configuration"
Configuration"
Configuration"
8-13
- Quick Links:
- Unlocking and Locking Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
