Table of Contents
Advertisement
Chapter 3
Installing the Cisco XR 12410 Router
Reinstalling Cards in the Line Card and RP Card Cage
Step 1
OL-13832-01
Before you begin reinstalling cards in the card cage, identify slot assignments by
referring to the written list you prepared when you removed the cards (refer to
Figure 3-7
for slot-numbering).
Use the following procedure to reinstall cards in the line card and RP card cage.
Starting at slot 0
(Figure
Slide the card into the slot until it mates with the backplane connector.
b.
a.
Tighten the captive screws at the top and bottom of the front panel.
Figure 3-25
Installing a Line Card into the Line Card and RP Card Cage
ALARM A
ALARM B
3-25):
MBUS
CSC
SFC
A
ALARM A
B
FAIL
ALARM B
ENABLE
A
B
0
1
0
1
2
3
4
Cisco XR 12410 Router Installation Guide
Reinstalling Cards in the Chassis
3-33
Advertisement
Table of Contents
Troubleshooting
