Debug Fallback-Bridging - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

debug fallback-bridging

Use the debug fallback-bridging privileged EXEC command to enable debugging of the fallback

bridging manager software module. This command debugs the platform-specific part of the process of

learning MAC addresses on bridge groups and updating the hardware with the necessary information.

Use the no form of this command to disable debugging.

Syntax Description

This command has no arguments or keywords.

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug fallback-bridging command is the same as the no debug fallback-bridging command.

Related Commands

show debugging

Catalyst 3550 Multilayer Switch Command Reference

debug fallback-bridging

no debug fallback-bridging

Modification

This command was introduced.

Displays information about the types of debugging that are enabled. For

syntax information, select Cisco IOS Release 12.2 Configuration Guides

and Command References > Cisco IOS Configuration Fundamentals

Configuration Guide, Release 12.2 > System Management >

Troubleshooting and Fault Management.

Catalyst 3550 Switch Debug Commands

Table of Contents