Cisco Catalyst 3550 Command Reference Manual page 692

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

wrr-queue random-detect max-threshold

This example shows how to configure the WRED maximum threshold values for queue 1 from 50 to 100

percent, for queue 2 from 70 to 100 percent, for queue 3 from 50 to 100 percent, and for queue 4 from

70 to 100 percent:

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# wrr-queue random-detect max-threshold 1 50 100

Switch(config-if)# wrr-queue random-detect max-threshold 2 70 100

Switch(config-if)# wrr-queue random-detect max-threshold 3 50 100

Switch(config-if)# wrr-queue random-detect max-threshold 4 70 100

You can verify your settings by entering the show mls qos interface buffers privileged EXEC command.

Related Commands

show mls qos interface

wrr-queue dscp-map

wrr-queue queue-limit

Catalyst 3550 Multilayer Switch Command Reference

Displays QoS information.

Maps DSCP values to the tail-drop or WRED thresholds of the egress

Configures the sizes of the egress queues on Gigabit-capable Ethernet

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands

Chapters

Table of Contents