Cisco Catalyst 3550 Command Reference Manual page 341

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands

This is an example of output from the show access-lists hardware counters command:

Switch# show access-lists hardware counters

Input Drops:

Output Drops:

Input Forwarded:

Output Forwarded:

Input Bridge Only:

Bridge and Route in CPU: 0 matches (0 bytes)

Route in CPU:

Related Commands

ip access list

mac access-list extended

10 permit host 1100.bb00.00cc host 2234.0123.2345

0 matches (0 bytes)

234781 matches (19942889 bytes)

0 matches (0 bytes)

160 matches (10344 bytes)

Configures a standard or extended numbered access list on the switch.

For syntax information, select Cisco IOS Release 12.2 Configuration

Guides and Command References > Cisco IOS IP Command

Reference, Volume 1 of 3: Addressing and Services, Release 12.2 >

IP Services Commands.

Configures a named IP access list on the switch. For syntax

information, select Cisco IOS Release 12.2 Configuration Guides and

Command References > Cisco IOS IP Command Reference, Volume

1 of 3: Addressing and Services, Release 12.2 > IP Services

Configures a named or numbered MAC access list on the switch.

Catalyst 3550 Multilayer Switch Command Reference

show access-lists

Chapters

Table of Contents