Cisco Catalyst 3550 Command Reference Manual page 529

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands

show vtp status Field Descriptions (continued)

VTP Domain Name

VTP Pruning Mode

VTP Traps Generation

Configuration Last

Related Commands

clear vtp counters

vtp (global configuration)

vtp (privileged EXEC)

vtp (VLAN configuration)

Name that identifies the administrative domain for the switch.

Displays whether pruning is enabled or disabled. Enabling pruning on a VTP server enables

pruning for the entire management domain. Pruning restricts flooded traffic to those trunk links

that the traffic must use to access the appropriate network devices.

Displays if VTP version 2 mode is enabled. All VTP version 2 switches operate in version 1

mode by default. Each VTP switch automatically detects the capabilities of all the other VTP

devices. A network of VTP devices should be configured to version 2 only if all VTP switches

in the network can operate in version 2 mode.

Displays whether VTP traps are sent to a network management station.

A 16-byte checksum of the VTP configuration.

Displays the date and time of the last configuration modification. Displays the IP address of the

switch that caused the configuration change to the database.

Clears the VTP and pruning counters.

Configures the VTP filename, interface name, domain name, and mode.

Configures the VTP password, pruning, and version.

Configures the VTP domain name, password, pruning, and mode.

Catalyst 3550 Multilayer Switch Command Reference

Chapters

Table of Contents