Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show ip dhcp snooping database
Use the show ip dhcp snooping database user EXEC command to display the status of the DHCP
snooping binding database agent.
This command is available only if your switch is running the IP services image, formerly known as the
enhanced multilayer image (EMI).
Syntax Description
detail
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)SEA
Examples
This is an example of output from the show ip dhcp snooping database command:
Switch> show ip dhcp snooping database
Agent URL :
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : Not Running
Abort Timer Expiry : Not Running
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts
Successful Transfers :
Successful Reads
Successful Writes
Media Failures
This is an example of output from the show ip dhcp snooping database detail command:
Switch# show ip dhcp snooping database detail
Agent URL : tftp://10.1.1.1/directory/file
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
OL-8566-01
show ip dhcp snooping database [detail] [ | {begin | exclude | include} expression]
(Optional) Display detailed status and statistics information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
:
:
:
:
0
Startup Failures :
0
Failed Transfers :
0
Failed Reads
:
0
Failed Writes
:
0
Catalyst 3550 Multilayer Switch Command Reference
show ip dhcp snooping database
0
0
0
0
2-389