Show Cluster Candidates - Cisco Catalyst 3550 Command Reference Manual
Multilayer switch
Hide thumbs
Also See for Catalyst 3550:
- Command reference manual (662 pages) ,
- Installation manual (154 pages) ,
- Hardware installation manual (106 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
show cluster candidates
Use the show cluster candidates privileged EXEC command on the command switch to display a list
of candidate switches.
Syntax Description
detail
mac-address H.H.H.
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.1(4)EA1
Usage Guidelines
Enter this command only on a command switch.
If the switch is not a command switch, the command returns an empty line at the prompt.
The SN in the display means switch member number. If E appears in the SN column, it means that the
switch is discovered through extended discovery. If E does not appear in the SN column, it means that
the switch member number is the upstream neighbor of the candidate switch. The hop count is the
number of devices the candidate is from the command switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show cluster candidates command:
Switch> show cluster candidates
This is an example of output from the show cluster candidates command that uses the MAC address of
a member switch directly connected to the command switch:
Switch> show cluster candidates mac-address 00d0.7961.c4c0
Device 'Tahiti-12' with mac address number 00d0.7961.c4c0
OL-8566-01
show cluster candidates [detail | mac-address H.H.H.] [ | {begin | exclude | include} expression]
(Optional) Display detailed information for all candidates.
(Optional) MAC address of the cluster candidate.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
MAC Address
Name
00d0.7961.c4c0 StLouis-2
00d0.bbf5.e900 ldf-dist-128 WS-C3524-XL
00e0.1e7e.be80 1900_Switch
00e0.1e9f.7a00 Surfers-24
00e0.1e9f.8c00 Surfers-12-2 WS-C2912-XL
00e0.1e9f.8c40 Surfers-12-1 WS-C2912-XL
Device Type
PortIf
WS-C3550-12T
Gi0/1
Fa0/7
1900
3
WS-C2924-XL
Fa0/5
Fa0/4
Fa0/1
Catalyst 3550 Multilayer Switch Command Reference
show cluster candidates
|---Upstream---|
FEC Hops SN PortIf
FEC
2
1
Fa0/11
1
0
Fa0/24
0
1
0
Fa0/11
1
0
Fa0/3
1
0
Fa0/7
1
0
Fa0/9
2-325
Advertisement
Chapters
Table of Contents
